Do you have damage to your roof? Depending on the type of roofing system you have, you might be able to use EPDM Butyl Rubber Coatings as a means to repair it. These coatings provide some great advantages and could be used to cover your entire roof and provide it with a substantial amount of protection.
You’ll find that EPDM Butyl Rubber Coatings are a rubber option that can be used for a range of purposes including RV roofs, commercial roofs, and even flat or slightly sloped residential properties. Let’s get a closer look at what the material is and then how it can be used for repairs.
What Is EPDM?
EPDM is made when ethylene and propylene are combined with a diene monomer attached. This synthetic elastomer is resistant to oxidation and UV rays, and it works as an excellent barrier to moisture. It can tolerate temperatures that are extremely low or high, which means it can be used with great effect in any geographic environment. EPDM rubber has been used for a host of purposes over the years, not just roofing.
For roofs, there are several options. Often, there are large sheets that can be attached to the roof as part of the roofing system. To provide further protection, EPDM Butyl Rubber Coatings for the rubber roof are often added.
If you have a roof that already has a liquid rubber coating, or if you have a roof with EPDM sheets, you can often make spot repairs on areas that have issues. If you have a different type of roof, you may need to add a full coat of the EPDM Butyl Rubber Coatings and rubber to the entire roof. It all depends on the type of roof you have for your home or RV and the damage it has.
Take the time to find the areas that need to be repaired with a visual inspection. You can do this, or you could hire someone to inspect and repair the roof if you prefer.
Clean the Roof
Regardless of the type of roof, the first thing you need to do is clean it. You will want to sweep away all of the debris that might have accumulated on the roof. This could include leaves, branches, dirt, etc. You will then want to clean the roof using water to get up and as much dirt as possible that has become stuck to it.
Repair Any Damage
If there is any major damage, it should be fixed before using the coating for the final repairs. For example, if you have a hole in the roof, which will need to be repaired before you can put on the EPDM Butyl Rubber Coatings. Once any large damage has been repaired, you can then figure out how much of the material you need to patch the areas where there are cracks and holes.
If you are going to be doing the entire roof, you should make sure that you buy enough to cover your whole roof. If you are only going to be doing spot repairs on your roof, you will not need to have as much.
Carefully Apply the Coating
The EPDM Butyl Rubber Coatings are rubber that’s been liquified, which means it can go on similarly to paint. You can even use brushes and rollers. If you only have a small area to do, then a brush might be all that you need. If you have a larger space to cover, using rollers will be a better option.
The coating tends to dry and cure quickly, so you can ensure your property is waterproof almost as soon as you apply the liquid rubber.